# Makefile.in generated by automake 1.16.5 from Makefile.am.
# lib/d/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2021 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
#


am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/thrift
pkgincludedir = $(includedir)/thrift
pkglibdir = $(libdir)/thrift
pkglibexecdir = $(libexecdir)/thrift
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-linux-gnu
am__append_1 = test
am__append_2 = $(D_EVENT_LIB_NAME)
am__append_3 = $(D_SSL_LIB_NAME)
am__append_4 = $(DMD_LIBEVENT_FLAGS)
am__append_5 = $(DMD_OPENSSL_FLAGS)
subdir = lib/d
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/aclocal/ac_prog_bison.m4 \
	$(top_srcdir)/aclocal/ax_boost_base.m4 \
	$(top_srcdir)/aclocal/ax_check_openssl.m4 \
	$(top_srcdir)/aclocal/ax_compare_version.m4 \
	$(top_srcdir)/aclocal/ax_cxx_compile_stdcxx.m4 \
	$(top_srcdir)/aclocal/ax_cxx_compile_stdcxx_11.m4 \
	$(top_srcdir)/aclocal/ax_dmd.m4 \
	$(top_srcdir)/aclocal/ax_javac_and_java.m4 \
	$(top_srcdir)/aclocal/ax_lib_event.m4 \
	$(top_srcdir)/aclocal/ax_lib_zlib.m4 \
	$(top_srcdir)/aclocal/ax_lua.m4 \
	$(top_srcdir)/aclocal/ax_prog_dotnetcore_version.m4 \
	$(top_srcdir)/aclocal/ax_prog_haxe_version.m4 \
	$(top_srcdir)/aclocal/ax_prog_perl_modules.m4 \
	$(top_srcdir)/aclocal/ax_signed_right_shift.m4 \
	$(top_srcdir)/aclocal/ax_thrift_internal.m4 \
	$(top_srcdir)/aclocal/libtool.m4 \
	$(top_srcdir)/aclocal/ltoptions.m4 \
	$(top_srcdir)/aclocal/ltsugar.m4 \
	$(top_srcdir)/aclocal/ltversion.m4 \
	$(top_srcdir)/aclocal/lt~obsolete.m4 \
	$(top_srcdir)/aclocal/tar.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h \
	$(top_builddir)/lib/cpp/src/thrift/config.h \
	$(top_builddir)/lib/c_glib/src/thrift/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(d_asyncdir)" \
	"$(DESTDIR)$(d_codegendir)" "$(DESTDIR)$(d_internaldir)" \
	"$(DESTDIR)$(d_protocoldir)" "$(DESTDIR)$(d_serverdir)" \
	"$(DESTDIR)$(d_servertransportdir)" "$(DESTDIR)$(d_testdir)" \
	"$(DESTDIR)$(d_thriftdir)" "$(DESTDIR)$(d_transportdir)" \
	"$(DESTDIR)$(d_utildir)"
DATA = $(d_async_DATA) $(d_codegen_DATA) $(d_internal_DATA) \
	$(d_protocol_DATA) $(d_server_DATA) $(d_servertransport_DATA) \
	$(d_test_DATA) $(d_thrift_DATA) $(d_transport_DATA) \
	$(d_util_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	distdir distdir-am
am__extra_recursive_targets = style-recursive
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red='[0;31m'; \
    grn='[0;32m'; \
    lgn='[1;32m'; \
    blu='[1;34m'; \
    mgn='[0;35m'; \
    brg='[1m'; \
    std='[m'; \
  fi; \
}
DIST_SUBDIRS = . test
am__DIST_COMMON = $(srcdir)/Makefile.in README.md
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} '/thrift/src/missing' aclocal-1.16
ALLOCA = 
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
ANT = /usr/bin/ant
ANT_FLAGS = 
AR = ar
AUTOCONF = ${SHELL} '/thrift/src/missing' autoconf
AUTOHEADER = ${SHELL} '/thrift/src/missing' autoheader
AUTOMAKE = ${SHELL} '/thrift/src/missing' automake-1.16
AWK = mawk
BISON = bison
BOOST_CHRONO_LDADD = /usr/lib/x86_64-linux-gnu/libboost_chrono.a
BOOST_CPPFLAGS = -I/usr/include
BOOST_FILESYSTEM_LDADD = /usr/lib/x86_64-linux-gnu/libboost_filesystem.a
BOOST_LDFLAGS = -L/usr/lib/x86_64-linux-gnu
BOOST_LIB_DIR = /usr/lib/x86_64-linux-gnu
BOOST_SYSTEM_LDADD = /usr/lib/x86_64-linux-gnu/libboost_system.a
BOOST_TEST_LDADD = /usr/lib/x86_64-linux-gnu/libboost_unit_test_framework.a
BOOST_THREAD_LDADD = /usr/lib/x86_64-linux-gnu/libboost_thread.a
BUNDLER = /usr/bin/bundle
CARGO = 
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CLASSPATH = 
CPP = gcc -E
CPPFLAGS = 
CPPSTYLE_CMD = find . -type f \( -iname "*.h" -or -iname "*.cpp" -or -iname "*.cc" -or -iname "*.tcc" \) -printf "Reformatting: %h/%f\n" -exec clang-format -i {} \;
CSCOPE = cscope
CTAGS = ctags
CXX = g++ -std=c++11
CXXCPP = g++ -E -std=c++11
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DART = /usr/bin/dart
DARTPUB = 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DMD = dmd
DMD_LIBEVENT_FLAGS = -L-fuse-ld=gold -L-levent
DMD_OF_DIRSEP = /
DMD_OPENSSL_FLAGS = -L-fuse-ld=gold -L-lssl -L-lcrypto
DOTNETCORE = /usr/bin/dotnet
DOTNETCORE_VERSION = 9.0.106
DSYMUTIL = 
DUMPBIN = 
D_EVENT_LIB_NAME = libthriftd-event.a
D_IMPORT_PREFIX = ${prefix}/include/d2
D_LIB_NAME = libthriftd.a
D_SSL_LIB_NAME = libthriftd-ssl.a
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
ENABLE_COVERAGE = 2
ERL = 
ERLANG_INSTALL_LIB_DIR = 
ERLANG_INSTALL_LIB_DIR_thrift = 
ERLANG_LIB_DIR = 
ERLC = 
ERLCFLAGS = 
ETAGS = etags
EXEEXT = 
FGREP = /usr/bin/grep -F
GCOV_CFLAGS = 
GCOV_CXXFLAGS = 
GCOV_LDFLAGS = 
GLIB_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include
GLIB_LIBS = -lglib-2.0
GO = /usr/local/bin/go
GOBJECT_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include
GOBJECT_LIBS = -lgobject-2.0 -lglib-2.0
GRADLE = /usr/local/bin/gradle
GRADLE_OPTS = 
GREP = /usr/bin/grep
GSETTINGS = /usr/bin/gsettings
HAVE_CXX11 = 1
HAXE = 
HAXE_VERSION = 
INSTALL = /usr/bin/install -c
INSTALLDIRS = vendor
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
JAVA_PREFIX = /usr/local/lib
LD = /usr/bin/ld -m elf_x86_64
LDFLAGS = 
LEX = flex
LEXLIB = 
LEX_OUTPUT_ROOT = lex.yy
LIBEVENT_CPPFLAGS = 
LIBEVENT_LDFLAGS = 
LIBEVENT_LIBS = -levent
LIBOBJS = 
LIBS = -lrt -lpthread 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
LT_SYS_LIBRARY_PATH = 
LUA = /usr/bin/lua
LUA_EXEC_PREFIX = ${exec_prefix}
LUA_INCLUDE = -I/usr/include/lua5.4
LUA_LIB = -llua5.4 
LUA_PLATFORM = unknown
LUA_PREFIX = ${prefix}
LUA_SHORT_VERSION = 54
LUA_VERSION = 5.4
MAKEINFO = ${SHELL} '/thrift/src/missing' makeinfo
MANIFEST_TOOL = :
MAYBE_CL = cl
MAYBE_CPP = cpp
MAYBE_C_GLIB = c_glib
MAYBE_D = d
MAYBE_DART = 
MAYBE_ERLANG = 
MAYBE_GO = go
MAYBE_JAVA = java
MAYBE_KOTLIN = kotlin
MAYBE_LUA = lua
MAYBE_NETSTD = netstd
MAYBE_NODEJS = nodejs
MAYBE_NODETS = nodets
MAYBE_PERL = perl
MAYBE_PHP = php
MAYBE_PY3 = py3
MAYBE_PYTHON = py
MAYBE_RS = 
MAYBE_RUBY = rb
MAYBE_SWIFT = 
MKDIR_P = /usr/bin/mkdir -p
NM = /usr/bin/nm -B
NMEDIT = 
NODEJS = /usr/bin/node
NODETS = /usr/bin/node
NPM = /usr/bin/npm
OBJDUMP = objdump
OBJEXT = o
OPENSSL_INCLUDES = 
OPENSSL_LDFLAGS = 
OPENSSL_LIBS = -lssl -lcrypto
OTOOL = 
OTOOL64 = 
PACKAGE = thrift
PACKAGE_BUGREPORT = 
PACKAGE_NAME = thrift
PACKAGE_STRING = thrift 0.22.0
PACKAGE_TARNAME = thrift
PACKAGE_URL = 
PACKAGE_VERSION = 0.22.0
PATH_SEPARATOR = :
PERL = /usr/bin/perl
PERL_PREFIX = /usr/local
PHP = /usr/bin/php
PHP_CONFIG = /usr/bin/php-config
PHP_CONFIG_PREFIX = /etc/php.d
PHP_PREFIX = /usr/lib/php
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = 
PYTHON = /usr/bin/python3
PYTHON3 = /usr/bin/python3
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 3.10
PY_PREFIX = /usr
QT5_CFLAGS = -DQT_NETWORK_LIB -DQT_CORE_LIB -I/usr/include/x86_64-linux-gnu/qt5/QtNetwork -I/usr/include/x86_64-linux-gnu/qt5 -I/usr/include/x86_64-linux-gnu/qt5/QtCore -I/usr/include/x86_64-linux-gnu/qt5
QT5_LIBS = -lQt5Network -lQt5Core
QT5_MOC = /usr/bin/moc
RANLIB = ranlib
REBAR = /usr/local/bin/rebar3
RUBY = /usr/bin/ruby
RUBY_PREFIX = 
RUSTC = 
SBCL = /usr/local/bin/sbcl
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/bash
STRIP = strip
SWIFT = 
THRIFT = /thrift/src/compiler/cpp/thrift
TRIAL = 
VERSION = 0.22.0
YACC = bison -y
YFLAGS = 
ZLIB_CPPFLAGS = 
ZLIB_LDFLAGS = 
ZLIB_LIBS = -lz
abs_builddir = /thrift/src/lib/d
abs_srcdir = /thrift/src/lib/d
abs_top_builddir = /thrift/src
abs_top_srcdir = /thrift/src
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --hard-dereference --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
golang_version = go version go1.24.3 linux/amd64
have_prog_bison = yes
host = x86_64-pc-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /thrift/src/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
luadir = ${prefix}/share/lua/5.4
luaexecdir = ${exec_prefix}/lib/lua/5.4
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgluadir = ${luadir}/thrift
pkgluaexecdir = ${luaexecdir}/thrift
pkgpyexecdir = ${pyexecdir}/thrift
pkgpythondir = ${pythondir}/thrift
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${PYTHON_EXEC_PREFIX}/lib/python3.10/site-packages
pythondir = ${PYTHON_PREFIX}/lib/python3.10/site-packages
runstatedir = ${localstatedir}/run
rustc_version = 
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
subdirs =  lib/php/src/ext/thrift_protocol
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
AUTOMAKE_OPTIONS = serial-tests
SUBDIRS = . $(am__append_1)

#
# Enumeration of all the public and private modules.
#
# We unconditionally install all of them, even if libevent or OpenSSL are
# not available, but build the respective libraries only if the Deimos headers
# could be found.
#
d_thriftmodules = $(addprefix thrift/, base)
d_thriftdir = $(D_IMPORT_PREFIX)/thrift
d_thrift_DATA = $(addprefix src/, $(addsuffix .d, $(d_thriftmodules)))
d_asyncmodules = $(addprefix thrift/async/, base libevent socket ssl)
d_asyncdir = $(d_thriftdir)/async
d_async_DATA = $(addprefix src/, $(addsuffix .d, $(d_asyncmodules)))
d_codegenmodules = $(addprefix thrift/codegen/, async_client \
	async_client_pool base client client_pool processor)

#d_codegenmodules = $(addprefix thrift/codegen/, async_client \
#	async_client_pool base client client_pool idlgen processor)
d_codegendir = $(d_thriftdir)/codegen
d_codegen_DATA = $(addprefix src/, $(addsuffix .d, $(d_codegenmodules)))
d_protocolmodules = $(addprefix thrift/protocol/, base binary compact json \
	processor)

d_protocoldir = $(d_thriftdir)/protocol
d_protocol_DATA = $(addprefix src/, $(addsuffix .d, $(d_protocolmodules)))
d_servermodules = $(addprefix thrift/server/, base simple nonblocking \
	taskpool threaded)

d_serverdir = $(d_thriftdir)/server
d_server_DATA = $(addprefix src/, $(addsuffix .d, $(d_servermodules)))
d_servertransportmodules = $(addprefix thrift/server/transport/, base socket ssl)
d_servertransportdir = $(d_thriftdir)/server/transport
d_servertransport_DATA = $(addprefix src/, $(addsuffix .d, \
	$(d_servertransportmodules)))

d_transportmodules = $(addprefix thrift/transport/, base buffered file \
	framed http memory piped range socket ssl zlib)

d_transportdir = $(d_thriftdir)/transport
d_transport_DATA = $(addprefix src/, $(addsuffix .d, $(d_transportmodules)))
d_utilmodules = $(addprefix thrift/util/, awaitable cancellation future \
	hashset)

d_utildir = $(d_thriftdir)/util
d_util_DATA = $(addprefix src/, $(addsuffix .d, $(d_utilmodules)))
d_internalmodules = $(addprefix thrift/internal/, algorithm codegen ctfe \
	endian resource_pool socket ssl ssl_bio traits)

d_internaldir = $(d_thriftdir)/internal
d_internal_DATA = $(addprefix src/, $(addsuffix .d, $(d_internalmodules)))
d_testmodules = $(addprefix thrift/internal/test/, protocol server)
d_testdir = $(d_internaldir)/test
d_test_DATA = $(addprefix src/, $(addsuffix .d, $(d_testmodules)))
d_publicmodules = $(d_thriftmodules) $(d_asyncmodules) \
	$(d_codegenmodules) $(d_protocolmodules) $(d_servermodules) \
	$(d_servertransportmodules) $(d_transportmodules) $(d_utilmodules)

d_publicsources = $(addprefix src/, $(addsuffix .d, $(d_publicmodules)))
d_modules = $(d_publicmodules) $(d_internalmodules) $(d_testmodules)

# List modules with external dependencies and remove them from the main list
d_libevent_dependent_modules = thrift/async/libevent thrift/server/nonblocking
d_openssl_dependent_modules = thrift/async/ssl thrift/internal/ssl \
	thrift/internal/ssl_bio thrift/transport/ssl thrift/server/transport/ssl

d_main_modules = $(filter-out $(d_libevent_dependent_modules) \
	$(d_openssl_dependent_modules),$(d_modules))

d_lib_flags = -w -wi -Isrc -lib -version=use_openssl_1_0_x
all_targets = $(am__append_2) $(am__append_3) $(D_LIB_NAME)

#
# Unit tests (built both in debug and release mode).
#
d_test_flags = -unittest -w -wi -I$(top_srcdir)/lib/d/src \
	-version=use_openssl_1_0_x $(am__append_4) $(am__append_5)

# There just must be some way to reassign a variable without warnings in
# Automake...
d_test_modules__ = $(d_modules)
#d_test_modules_ = $(filter-out $(d_libevent_dependent_modules), $(d_test_modules__))
d_test_modules_ = $(d_test_modules__)
#d_test_modules = $(filter-out $(d_openssl_dependent_modules), $(d_test_modules_))
d_test_modules = $(d_test_modules_)
TESTS = $(addprefix unittest/debug/, $(d_test_modules)) \
	$(addprefix unittest/release/, $(d_test_modules))

EXTRA_DIST = \
	src \
	test \
	README.md

all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/d/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign lib/d/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-d_asyncDATA: $(d_async_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_async_DATA)'; test -n "$(d_asyncdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_asyncdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_asyncdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_asyncdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_asyncdir)" || exit $$?; \
	done

uninstall-d_asyncDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_async_DATA)'; test -n "$(d_asyncdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_asyncdir)'; $(am__uninstall_files_from_dir)
install-d_codegenDATA: $(d_codegen_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_codegen_DATA)'; test -n "$(d_codegendir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_codegendir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_codegendir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_codegendir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_codegendir)" || exit $$?; \
	done

uninstall-d_codegenDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_codegen_DATA)'; test -n "$(d_codegendir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_codegendir)'; $(am__uninstall_files_from_dir)
install-d_internalDATA: $(d_internal_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_internal_DATA)'; test -n "$(d_internaldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_internaldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_internaldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_internaldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_internaldir)" || exit $$?; \
	done

uninstall-d_internalDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_internal_DATA)'; test -n "$(d_internaldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_internaldir)'; $(am__uninstall_files_from_dir)
install-d_protocolDATA: $(d_protocol_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_protocol_DATA)'; test -n "$(d_protocoldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_protocoldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_protocoldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_protocoldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_protocoldir)" || exit $$?; \
	done

uninstall-d_protocolDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_protocol_DATA)'; test -n "$(d_protocoldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_protocoldir)'; $(am__uninstall_files_from_dir)
install-d_serverDATA: $(d_server_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_server_DATA)'; test -n "$(d_serverdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_serverdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_serverdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_serverdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_serverdir)" || exit $$?; \
	done

uninstall-d_serverDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_server_DATA)'; test -n "$(d_serverdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_serverdir)'; $(am__uninstall_files_from_dir)
install-d_servertransportDATA: $(d_servertransport_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_servertransport_DATA)'; test -n "$(d_servertransportdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_servertransportdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_servertransportdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_servertransportdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_servertransportdir)" || exit $$?; \
	done

uninstall-d_servertransportDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_servertransport_DATA)'; test -n "$(d_servertransportdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_servertransportdir)'; $(am__uninstall_files_from_dir)
install-d_testDATA: $(d_test_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_test_DATA)'; test -n "$(d_testdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_testdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_testdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_testdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_testdir)" || exit $$?; \
	done

uninstall-d_testDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_test_DATA)'; test -n "$(d_testdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_testdir)'; $(am__uninstall_files_from_dir)
install-d_thriftDATA: $(d_thrift_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_thrift_DATA)'; test -n "$(d_thriftdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_thriftdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_thriftdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_thriftdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_thriftdir)" || exit $$?; \
	done

uninstall-d_thriftDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_thrift_DATA)'; test -n "$(d_thriftdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_thriftdir)'; $(am__uninstall_files_from_dir)
install-d_transportDATA: $(d_transport_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_transport_DATA)'; test -n "$(d_transportdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_transportdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_transportdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_transportdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_transportdir)" || exit $$?; \
	done

uninstall-d_transportDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_transport_DATA)'; test -n "$(d_transportdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_transportdir)'; $(am__uninstall_files_from_dir)
install-d_utilDATA: $(d_util_DATA)
	@$(NORMAL_INSTALL)
	@list='$(d_util_DATA)'; test -n "$(d_utildir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(d_utildir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(d_utildir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(d_utildir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(d_utildir)" || exit $$?; \
	done

uninstall-d_utilDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(d_util_DATA)'; test -n "$(d_utildir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(d_utildir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"
style-local: 

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
	srcdir=$(srcdir); export srcdir; \
	list=' $(TESTS) '; \
	$(am__tty_colors); \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst $(AM_TESTS_FD_REDIRECT); then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		col=$$red; res=XPASS; \
	      ;; \
	      *) \
		col=$$grn; res=PASS; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xfail=`expr $$xfail + 1`; \
		col=$$lgn; res=XFAIL; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		col=$$red; res=FAIL; \
	      ;; \
	      esac; \
	    else \
	      skip=`expr $$skip + 1`; \
	      col=$$blu; res=SKIP; \
	    fi; \
	    echo "$${col}$$res$${std}: $$tst"; \
	  done; \
	  if test "$$all" -eq 1; then \
	    tests="test"; \
	    All=""; \
	  else \
	    tests="tests"; \
	    All="All "; \
	  fi; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="$$All$$all $$tests passed"; \
	    else \
	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all $$tests failed"; \
	    else \
	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
	    fi; \
	  fi; \
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    if test "$$skip" -eq 1; then \
	      skipped="($$skip test was not run)"; \
	    else \
	      skipped="($$skip tests were not run)"; \
	    fi; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  if test "$$failed" -eq 0; then \
	    col="$$grn"; \
	  else \
	    col="$$red"; \
	  fi; \
	  echo "$${col}$$dashes$${std}"; \
	  echo "$${col}$$banner$${std}"; \
	  test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \
	  test -z "$$report" || echo "$${col}$$report$${std}"; \
	  echo "$${col}$$dashes$${std}"; \
	  test "$$failed" -eq 0; \
	else :; fi

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(DATA) all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(d_asyncdir)" "$(DESTDIR)$(d_codegendir)" "$(DESTDIR)$(d_internaldir)" "$(DESTDIR)$(d_protocoldir)" "$(DESTDIR)$(d_serverdir)" "$(DESTDIR)$(d_servertransportdir)" "$(DESTDIR)$(d_testdir)" "$(DESTDIR)$(d_thriftdir)" "$(DESTDIR)$(d_transportdir)" "$(DESTDIR)$(d_utildir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-d_asyncDATA install-d_codegenDATA \
	install-d_internalDATA install-d_protocolDATA \
	install-d_serverDATA install-d_servertransportDATA \
	install-d_testDATA install-d_thriftDATA \
	install-d_transportDATA install-d_utilDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-exec-local

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

style: style-recursive

style-am: style-local

uninstall-am: uninstall-d_asyncDATA uninstall-d_codegenDATA \
	uninstall-d_internalDATA uninstall-d_protocolDATA \
	uninstall-d_serverDATA uninstall-d_servertransportDATA \
	uninstall-d_testDATA uninstall-d_thriftDATA \
	uninstall-d_transportDATA uninstall-d_utilDATA

.MAKE: $(am__recursive_targets) check-am install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	check check-TESTS check-am clean clean-generic clean-libtool \
	clean-local cscopelist-am ctags ctags-am distclean \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-d_asyncDATA install-d_codegenDATA \
	install-d_internalDATA install-d_protocolDATA \
	install-d_serverDATA install-d_servertransportDATA \
	install-d_testDATA install-d_thriftDATA \
	install-d_transportDATA install-d_utilDATA install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-exec-local install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
	ps ps-am style-am style-local tags tags-am uninstall \
	uninstall-am uninstall-d_asyncDATA uninstall-d_codegenDATA \
	uninstall-d_internalDATA uninstall-d_protocolDATA \
	uninstall-d_serverDATA uninstall-d_servertransportDATA \
	uninstall-d_testDATA uninstall-d_thriftDATA \
	uninstall-d_transportDATA uninstall-d_utilDATA

.PRECIOUS: Makefile


#
# libevent-dependent modules.
#
$(D_EVENT_LIB_NAME): $(addprefix src/, $(addsuffix .d, $(d_libevent_dependent_modules)))
	$(DMD) -of$(D_EVENT_LIB_NAME) $(d_lib_flags) $^

#
# OpenSSL-dependent modules.
#
$(D_SSL_LIB_NAME): $(addprefix src/, $(addsuffix .d, $(d_openssl_dependent_modules)))
	$(DMD) -of$(D_SSL_LIB_NAME) $(d_lib_flags) $^

#
# Main library target.
#
$(D_LIB_NAME): $(addprefix src/, $(addsuffix .d, $(d_main_modules)))
	$(DMD) -of$(D_LIB_NAME) $(d_lib_flags) $^

#
# Documentation target (requires Dil).
#
docs: $(d_publicsources) src/thrift/index.d
	dil ddoc docs -hl --kandil $^

#
# Hook custom library targets into the automake all/install targets.
#
all-local: $(all_targets)

install-exec-local:
	$(INSTALL_PROGRAM) $(all_targets) $(DESTDIR)$(libdir)

clean-local:
	$(RM) -r docs
	$(RM) $(D_LIB_NAME)
	$(RM) $(D_EVENT_LIB_NAME)
	$(RM) $(D_SSL_LIB_NAME)
	$(RM) -r test/gen-d
	$(RM) -r unittest

unittest/emptymain.d: unittest/.directory
	@echo 'void main(){}' >$@

unittest/.directory:
	mkdir -p unittest || exists unittest
	touch $@

unittest/debug/%: src/%.d $(all_targets) unittest/emptymain.d
	$(DMD) -g -of$(subst /,$(DMD_OF_DIRSEP),$@) $(d_test_flags) $^

unittest/release/%: src/%.d $(all_targets) unittest/emptymain.d
	$(DMD) -O -release -of$(subst /,$(DMD_OF_DIRSEP),$@) $(d_test_flags) $^

precross: all-local
	$(MAKE) -C test precross

distdir:
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
